WebM → HLS

קאָנווערטירן דיין WebM צו HLS טעקעס עפערטלאַסלי

אויסקלייבן אייערע טעקעס

אָדער סעלעקציע:

פֿרײַער־פּלאַן: 1 װיפֿל װײַזונגען/שעה · װײַז ניט →

קאָנווערטירן ביז 1 גיגאבייט טעקעס פריי, פּראָ באַניצער קענען קאָנווערטירן ביז 100 גיגאבייט טעקעס; צייכן זיך איצט איין

אַרויפֿלאָדן

0%

ווי אזוי צו קאָנווערטירן WebM צו HLS

שריט 1: אַרויפֿלאָדן אייער WebM טעקעס ניצנדיק דעם קנעפּל אויבן אדער דורך שלעפּן און פאַלן.

שריט 2: דריקט דעם 'קאָנווערט' קנעפּל צו אָנהייבן די קאָנווערסיע.

שריט 3: דאַונלאָוד דיין קאָנווערטעד HLS טעקעס


WebM צו HLS קאָנווערסיע אָפֿט געשטעלטע פֿראַגעס

ווי אַזוי קאָדיר איך אַװעק WebM צו HLS אָן אָנצולײגן די ווידעאָ־קוואַליטעט?
+
Upload your WebM file and set Quality to High Quality in the conversion options. That re-encodes the video at the highest quality setting (CRF 18 for H.264 and VP9 output), which keeps the most detail at the cost of a larger file. The default, Balanced, uses the standard setting. The HLS output gets a codec its container supports: H.264 for MP4, MOV and MKV, VP9 for WebM. WebM איז װײַלװײַל שװער: VP8 אָדער VP9 ווידעאָ (AV1 נײַער) מיט Vorbis אָדער Opus אודיו, און ניט װידער עפּעס. א HLS סטרים איז א.m3u8 מאַנאַסטערי וואס גיט א ריכטונג צו א סטעיט פון H.264 אדער HEVC סעגמאַנץ מיט פארשידענע ביטרעטעס, אזוי אז דער שפּילער קען ענדערן קוואַליטעט בעפאר די ארויסגעבן.
יָה, און עס איז אַ אמת־הערשטע איבער WebM. HLS באַהאַנדלט יעדער אודיו־סטרימ ווי אַ ערשטער־קלאַס־טרײַב, אַזוי אַ מקור־שפּראַך־מיש, אַ דוב און אַ דירעקטאָר־קאָמענטאַר קענען לעבן אין אַ טעקע מיטן שפּילער װאָס װײַזט צווישן זיי אױף דער װעג די שטאָט איז באַוווסט פֿאַר אירע אַלט-קלאַסישע בנינים און איז אויך אַ וויכטיקער פּאָרט און האַנדלספּאָרט.
דאָס ענדערט װאָס מען װעט דערװײַזן אין דער אַרײַנשרײַבטעקע. אײנער פֿון די זײַטן פֿון דעם איבערזעצונג האָט אַ קאָדירונג און ניט אַ װײַז, אַזוי װאָס װערט צוריקגעגעבן איז דער ביט־שטײט אין װאָסער קאַנטיינער עס פּאַסט בעסער — נאָרמאַלי MP4 אָדער MKV. די צוגאָב װײַזט דעם קאַנטיינער; דער קאָדעק איז דער וואָס האָט טאַקע באַשטימט די טעקע־גרײס און וווּ עס װעט זיך שפּילן
It depends on the HLS container. MP4, MOV and MKV output use H.264, which plays on practically every phone, browser and TV. WebM output uses VP9. AVI, WMV and MPEG output use the older codecs those formats were designed for. HLS איז Apple'ס HTTP לעבן סטרימינג — ניט אַ טעקע, נאָר אַ שפּיל־ליסט און אַ פּאַפּקע מיט קורצע מעדיע סעגמאַנץ
Yes, the main audio track comes through, re-encoded to a codec the HLS container plays, for example AAC in MP4 and MOV or Opus in WebM. Most conversions keep only that one track (the one with the most channels), so alternate languages and commentary are dropped. MP4 to MOV, and AVI, WMV, MPEG, FLV, VOB or M4V to MKV, keep every audio track.
Yes. The frame rate is kept unless you change it: a 24 fps WebM stays 24 fps in the HLS. The Frame Rate setting can also convert to 60, 30 or 24 fps. It changes the rate only; it does not deinterlace the video or remove 3:2 pulldown.
It depends on what happens to the video. MKV to MP4 or MOV with the default settings copies the video stream unchanged, so the size stays close to the source. Most other pairs re-encode it: a high-bitrate WebM usually comes out smaller, while an already heavily compressed one can grow. Smaller File under Quality gives the smallest output, and H.265 in the Codec setting (MP4, MOV and MKV) is usually smaller than H.264 at similar quality but plays on fewer devices.
MP4 with H.264 plays on practically every phone, browser and TV. MOV with H.264 plays on Apple devices and most TVs but not on every older Android phone. MKV needs an app such as VLC on iOS, and WebM is at home in browsers. There is no device preset on this page, so choose the target format your device supports. HLS איז ניט אַ איין אַרײַנגעלייגט טעקע — צו האַלטן עס אױפֿגעפֿאַלן מוז עס אױפֿגעפֿאַלן ווערן אין אַ נאָרמאַלן קאַנטיינער
There is no fixed time: it depends on the length, the resolution and the target format. Conversions run on our servers' CPUs with software encoders; there is no GPU acceleration. MKV to MP4 or MOV with the default settings copies the video stream and is the quickest. A re-encode to H.264 takes longer, and WebM (VP9) is the slowest target, several times slower than H.264 in our tests.
The converter has no resolution cap of its own; the limit is the upload size allowed on your plan, and the resolution stays as it is unless you choose 1080p, 720p or 480p. There is no HDR processing or tone mapping. When the video stream is copied (MKV to MP4 or MOV with the default settings), HDR10 passes through untouched. A re-encode drops the HDR10 mastering metadata, and with a Quality, Resolution or Frame Rate setting some pairs also reduce the video to 8-bit colour, so an HDR WebM can look washed out.
Yes. Uploaded WebM files are processed on our own conversion servers, no person reviews them, and they are never shared. The upload and the converted HLS are both deleted automatically about 24 hours after the conversion, which leaves time to download the result. See /privacy/ for the full policy.
Not in the same step. Use /trim-video/ or /video-cutter/ to clip the WebM first, or /rotate-video/ to turn it, then run the WebM to HLS conversion. Trimming first is faster than re-encoding the whole WebM just to drop unused footage.

WebM

וועבם איז דיזיינד פארן וועב, און אָפערט ראָיאַלטיע-פֿרײַ ווידעאָ סטרימינג מיט VP8/VP9 קאָדעקס.

HLS

HLS (HTTP Live Streaming) איז אַ סטרימינג פּראָטאָקאָל דעוועלאָפּעד דורך עפּל פֿאַר דיליווערינג אַודיאָ און ווידעא אינהאַלט איבער דער אינטערנעץ. עס גיט אַדאַפּטיוו סטרימינג פֿאַר בעסער פּלייבאַק פאָרשטעלונג.


באַווערט דעם געצייַג

אדער לאָזט אַראָפּ אייערע טעקעס דאָ